Bricsys International Conference 2013 – Day 1

I’m in Darmstadt, Germany, attending the Bricsys International Conference 2013 as part of the CAD media. Today is Day 1 and CEO Erik de Keyser kicked off proceedings by taking the stage and set the tone for the two day conference. This slide says it all. Pic Courtesy: Sander Scheiris (Click to enlarge) Erik started [...]

Delcam Asian Technical Summit 2013 – Day 2

Day 2 of Delcam ATS started with Delcam China General Manager giving a presentation on PowerSHAPE 2014 which was followed by a demo titled “Modeling for Manufacture” where the demo jock explained how PowerSHAPE could be effectively used to modify a design so that it could be manufactured. Here is a video I recorded. This [...]

Delcam Asian Technical Summit 2013 – Visit To Thai Summit Group

As part of the Delcam Asian Technical Summit 2013, we were taking to Thai Summit group of companies in Bangkok. We were taken to three facilities – TSM Mold, TSM AutoPart and TSM R&D. We were shown around the facilities and explained how Delcam software was used along with others like Autoform and TopSolid to [...]

Delcam Asian Technical Summit 2013 – Visit To Mazak

As part of Delcam Asian Technical Summit 2013, we were taken to see Delcam software in action at a customer location in Bangkok. The customer was Mazak, a machine tool manufacturer headquartered in Japan. The company has 7000+ employees in all and has a presence in more than 70 locations around the world. The company [...]

Delcam Asian Technical Summit 2013 – Day 1

I’m in Bangkok attending Delcam’s Asian Technical Summit (ATS), a two day event where Delcam flies in members of the CAD/CAM media from various Asian countries and treats them to a host of information about its new products and services. Day 1 of Delcam ATS 2013s started with CEO Clive Martel giving attendees an update [...]

SolidWorks Mechanical Conceptual Announced At SolidWorks World 2013

Today is the first day of SolidWorks World 2013 and as the SolidWorks CEO Bertrand Sicot promised back in September 2012 at the SolidWorks 2013 launch, the company today unveiled their direct modeling solution titled “SolidWorks Mechanical Conceptual”. See “New V6 Based SolidWorks Conceptual Design Product“. This is what it looks like. Picture courtesy @RobRodriguez [...]

Dassault Systemes 3DEXPERIENCE FORUM Europe 2012

I’m in Brussels attending the European edition of the Dassault Systemes 3DEXPERIENCE FORUM. The event is well attended by around 1,200 Dassault Systemes customers and members of the media and analyst community. Among the Dassault Systemes executives who spoke in the morning plenary session were President and CEO Bernard Charles and Executive VP Industry, Marketing [...]

UP 2012 Cloud Computing Conference

This year the UP 2012 Cloud Computing Conference will be held on 12th December in San Francisco. This conference is considered to be an annual review of developments and trends in the cloud computing space and their impact on global economy and society. The venue is the South San Francisco Conference Center located at the [...]

Bricscad V13 Steps Into The MCAD Space

A year ago Bricsys added direct modeling capabilities to Bricscad V12 (see “Direct Modeling In Bricscad V12“). This year Bricsys is adding other building blocks of a MCAD system to Bricscad V13 – assembly modeling, 3D constraints and kinematics. Check out this video I took at the Bricsys International Conference 2012 in Amsterdam. Dmitry Ushakov, [...]

Bricsys International Conference 2012 – Day 2

The second day of the Bricsys International Conference 2012 in Amsterdam started with a keynote speech by famous Belgian physicist and standup comedian Lieven Scheire. Lieven was the keynote speaker last year as well and it was nice to seem him back doing his thing once again. Lieven is part of a daily TV show [...]


© 2017 All Rights Reserved. is a registered trademark of Deelip Menezes. Log in - Designed by Gabfire Themes