Bricsys International Conference 2012 – Day 1

Bricsys CEO Erik de Keyser kicked off the Bricsys International Conference 2012 in Amsterdam by giving a short presentation about the company, its beginnings and its evolution. The key point of his talk was the need for “careful differentiation”. Bricsys has come a long way from being a reseller of IntelliCAD to a company that [...]

Electrode Extraction In PowerSHAPE 2013

PowerSHAPE 2013 has a new feature to extract electrodes. Here is a video I took at the recently concluded Delcam Asian Technical Summit 2013 held in Jakarta, Indonesia.

Feature Recognition In PowerSHAPE 2013

PowerSHAPE is mainly used as a complimentary software to PowerMILL, Delcam’s flagship and extremely powerful CAM product. As a result, most of the time users of PowerSHAPE end up reading a CAD model created in another CAD system and tweak it so that it can be manufactured. Working on a dumb model without history and [...]

Direct Modeling In PowerSHAPE 2013

In my earlier post titled “What’s New In PowerSHAPE 2013” I mentioned some new Direct Modeling features. Here is a video I took at the recently concluded Delcam Asian Technical Summit 2013 held at Jakarta, Indonesia.

Delcam Asian Technical Summit 2012 – CRISPIN Footwear Solutions

Augmented reality is an amazing presentation tool. Check out this 3D presentation by Graham Vollans from Delcam on their CRISPIN footwear solutions.

Delcam Asian Technical Summit 2012 Day 3 – ArtCAM

Sandy Moffat, Delcam’s Asia Business Development Manager, gave a presentation on ArtCAM, Delcam’s CAM solution for artisans. Many of the world mints design their coins using ArtCAM. In fact the Royal Mint used ArtCAM to design the Olympic medals. The entry level product in the ArtCAM family is called ArtCAM Express and sells or $149. [...]

Delcam Asian Technical Summit 2012 Day 3 – FeatureCAM 2013

Vineet Seth, the Managing Director of Delcam India gave a presentation on FeatureCAM, a CAM solution that recognizes geometric features from a model and automatically generates tool paths according using standard methods. This use of standard, knowledge-based parameters (tools, speeds, feeds, etc.) yields in consistency from part to part. FeatureCAM was the first CAM system [...]

Delcam Asian Technical Summit 2012 Day 3 – Vortex And MachineDNA

Day 3 of the Delcam Asian Technical Summit 2012 contained a number of presentations from Delcam employees and customers. I found the presentation by Delcam’s Marketing Manager Peter Dickin particularly interesting. It was about Vortex and MachineDNA, a couple of new technologies that Delcam has been working on. Vortex is a patent pending high speed [...]

Delcam Asian Technical Summit 2012 – Day 2

I’m in Indonesia attending Delcam’s Asian Technical Summit being held in Jakarta. The event began yesterday evening with a welcome dinner and an introduction of Delcam employees. Today the day started with a visit to a local Delcam customer called Astra Ottoparts, a part of Astra International, one of  Indonesia’s largest diversified conglomerates. Astra Ottoparts [...]

3D Printing At Discovery Charter School – Part 17

<< Part 16 By David Lewis Discovery Charter School Goes 3D and Disrupts Things a Bit Vernon & Riley got invited to present on 3D Printing as a way to reduce waste in manufacturing at the most recent GATE Conference at UC Santa Cruz. The GATE program is for Gifted And Talented kids in the [...]




Archives

© 2017 Deelip.com. All Rights Reserved. Deelip.com is a registered trademark of Deelip Menezes. Log in - Designed by Gabfire Themes